Sidewalk Contractors Near Me in Round Rock, TX

Front walks, side-yard paths, walks to the back gate, and sidewalk panels along the street. We set the slope, the joints and the edges so the walk drains and doesn't become a trip hazard.

Working in Round Rock, Georgetown, Cedar Park, Leander, Hutto, Pflugerville and Brushy Creek.

Concrete sidewalk along a lawn with a curb inlet nearby

Concrete Sidewalk Contractors for the Public Right-of-Way

The sidewalk along the street is in the City's right-of-way. Round Rock's Transportation Department requires a Street Cut & Driveway Approach Permit for any work that cuts, breaks or damages it. Here's how that goes:

  • A registered contractor with a $1,000,000 certificate of insurance and a $2,000 surety bond on file with the City.
  • A location sketch of the work.
  • About 30 business days of review once the package is complete.
  • Construction Inspection Services inspects sidewalks, curb ramps and driveways in the right-of-way.
  • The work has to meet the City's Design and Construction Standards, current version adopted January 28, 2021.
Crew working on a neighborhood sidewalk section near a house
Stock photo, for illustration: crew working on a neighborhood sidewalk section near a house.

Concrete Walkway Contractors: Getting the Slope Right

Front walks on the west side often climb a slope to the door. Before adding a step, check whether a gentler walk would work. It's easier for everyone, from grandparents to wheeled trash cans.

Is your walk a walk or a ramp?

Measure the height change in inches and the horizontal length in feet.

Enter a rise and run to see the slope.
SlopeWhat the 2010 ADA Standards call it
Up to 1:20 (5%)A walking surface, not a ramp (cross slope still capped at 1:48, about 2%).
Steeper than 1:20 up to 1:12 (8.33%)A ramp: needs landings, and handrails once the rise passes 6 in.
Steeper than 1:12Too steep for an accessible ramp; lengthen the run or rethink the route.

Based on the 2010 ADA Standards (403.3, 405.2, 405.8). Private homes don't have to meet ADA, but the numbers are a good guide for any walk.

Sidewalk Installation Near Me: How a Walk Goes In

New front walk in four frames

Step through it with Next, or jump to a frame by number.

  1. Mark and dig

    Paint the layout, call 811 if digging deeper than 16 in with machines, remove sod and soft soil, and check for sprinkler lines.

  2. Base and forms

    Compact the base, set forms with a slight cross slope, and set expansion material at the porch, driveway or existing sidewalk.

  3. Pour and finish

    Place, screed, float, broom across the walk for traction, and tool the edges.

  4. Joints and cure

    Tool or saw control joints at regular spacing, start curing, and keep foot traffic off for a day or so.

Walk length to concrete volume

Type rough measurements in feet. It does the math; it does not price the job.

120 sq ft at 4 in is about 1.5 cubic yards; with a 10% overage for uneven base and spillage, plan on about 1.6 yd³.

Most residential walks are 4 in thick. A rough volume to compare bids, not a quote.

Street or yard?

Not Sure Who Owns That Sidewalk? Text Us a Photo.

Take one from the street showing the walk, the curb and your yard. We'll tell you whether it's likely in the right-of-way, which means a City permit, or on your lot.

Text photos to

(737) 888-5720

Sidewalk Concrete Contractors: Joints, Edges and Trees

Cracking from joints placed too far apart and lifting from tree roots cause most sidewalk trouble. Leave room around trunks, and talk to an arborist before cutting big roots.

On clay, a walk next to a bed that gets watered heavily will move more than the rest. Keep irrigation off the edges.

Straight talk

Grind it or replace it?

A small lip where two panels meet can often be ground flush. A panel that's tilted or broken should be replaced from joint to joint.

Sidewalk and Walkway Questions in Round Rock

Who fixes the sidewalk in front of my house?

The City's sidewalk runs through the public right-of-way. Any work that cuts or replaces it needs a Street Cut & Driveway Approach Permit from the Transportation Department, and a registered, bonded contractor (or you, as the homeowner, with your own insurance). It is worth asking the Transportation Department first whether any City work is planned on your block.

How wide should a front walk be?

Three feet is the minimum that feels okay. Four feet lets two people walk side by side and makes room for a stroller or wheelchair. Wider at the porch or driveway end looks more generous.

How do you keep a walk from cracking?

A compacted base, control joints about every 4 to 5 feet on a typical walk, an isolation joint where it meets the house, porch or driveway, and a slight cross slope so water runs off.

Can you make a walk accessible?

Yes. Keep the running slope at 1:20 or flatter and it's a walk, not a ramp. Steeper sections up to 1:12 become ramps with landings, and handrails once the rise passes 6 inches. The checker above does the math.

Do you repair cracked sidewalks?

Yes. Sidewalk repair is usually replacing panels joint to joint, or grinding small trip lips. See concrete repair.

Get a Sidewalk Layout and Price

Tell us what you're thinking about and roughly where the property is. We'll come look, ask a few questions about drainage and use, and send the scope in writing.

  • No charge for the visit or the written scope.
  • Photos help us show up with the right questions.
  • If the job is outside what we do, we'll say so.

Prefer to talk?

(737) 888-5720

Call or text.

Your sidewalk project details

Fields marked * are required.

No pressure and no obligation.

Related Sidewalk and Driveway Work

Sidewalk Cracked or Missing? Plan a Walk That Drains.

Slope, joints and edges decide whether a walk lasts. Our Round Rock concrete contractor homepage covers the rest of what we do.

CallTextSite visit